Product ID:FIBRE-BOND MK III
MSDS Date:10/01/1987
FSC:8030
NIIN:00N019942
MSDS Number: BLVKD

SKB COATINGS LTD

HAMILTON
BA

Emergency Phone: 809-295-5710

Info Phone: 809-295-5710

Cage: SKBC0

SKB COATINGS LTD

HAMILTON BA

Telephone: 809-295-5710

Cage: SKBC0

17@20C.

Fraction By Weight: 15-25%

FILLER BLEND

Fraction By Weight: 50-65%

17@20C.

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 15-35%

0.22@20C

CAS: 57-55-6

RTECS: TY2000000

Fraction By Weight: 1-2%

GLASS FIBERS; (CHOPPED GLASS FIBER)

Fraction By Weight: .5-3%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE/SKIN: MAY CAUSE IRRITATION. INHAL:
VAPOR/MIST MAY CAUSE HEADACHE OR NAUSEA. INGEST: MAY BE HARMFUL IF
SWALLOWED. HEALTH EFFECTS OF PRODUCT HAVE NOT BEEN TESTED. BASED ON
ITS COMPOSITION, THIS PROD UCT IS NOT BELIEVED TO BE PARTICULARLY
HAZARDOUS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid:INHAL: MOVE TO FRESH AIR. SKIN: WASH WITH SOAP AND WATER.
EYE: FLUSH WITH LARGE AMOUNT OF WATER FOR AT LEAST 15 MIN. SEE PHYS
IF IRRITATION PERSISTS. INGEST: DILUTE BY GIVING 2 GLASSES OF H2O.
SEE PHY S.

Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . USE H2O SPRAY TO COOL FIRE-EXPOSED CONTR.
USE H2O SPRAY TO KNOCK DOWN VAPORS.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT DUE TO PRESURE BUILD UP.

Spill Release Procedures:REMOVE WITH INERT ABSORBENT, IE SPREAD SAND
OVER SPILL AND TRANSFER TO SEPARATE CONTAINERS. KEEP SPILL OUT OF
SEWERS AND OPEN BODIES OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP FORM FREEZING. STORAGE
TEMPERATURES; MAX. 49C/120F. MIN. 1C/34F.
Other Precautions:DO NOT TAKE INTERNALLY. DO NOT GET IN EYES. AVOID
PROLONGED OR REPEATED CONTACT WITH SKIN. NOTE: THIS LATEX COATING
CONTAINS MATERIALS WHICH IN RAW FORM ARE DUST HAZARDS. WHEN USED IN
THIS FORMULATION , DUST HAZARDS ARE DIMINISHED.

Respiratory Protection:NONE REQUIRED IF GOOD VENTILATION IS MAINTAINED.
OTHERWISE, USE NIOSH/MSHA APPROVED SCBA OR EQUIVALENT.
Ventilation:NORMAL GOOD VENTILATION.
Protective Gloves:WATERPROOF GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NO SPECIAL REQUIREMENTS.
Work Hygienic Practices:REMOVE AND WASH CONTAIMINATED CLOTHING BEFORE
RE- USE. WASH HANDS WITH SOAP AND WATER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:N1
Boiling Pt:B.P. Text:100C/212F
Vapor Pres:SEE INGRED
Evaporation Rate & Reference:SLOWER THAN ETHER.
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:25-50

Stability Indicator/Materials to Avoid:YES
CONTACT WITH STRONG OXIDIZERS.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:NORMAL COMBUSTION PRODUCTS INCLUDING
CARBON DIOXIDE, CARBON MONOXIDE, AND OXIDES OF NITROGEN.

Waste Disposal Methods:LANDFILL OR INCINERATE SOLIDS AND CONTAMINATED
DIKING MATERIAL ACCORDING TO LOCAL, STATE AND, FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.